DIGITUS 3.5" USB 3.0 SSD/HDD RAID SATA enclosure

Description
3,5'' USB3.0 SSD/HDD RAID SATA Enclosure USB3.0 support JBOD, RAID0, RAID1
Secure your important data against loss by mirroring hard drives
Enables hard drive mirroring to ensure fail-safe operation
Supports the combining of two hard drives (JBOD)
Allows separate access to two hard drives (normal mode)
The DIGITUS® 3.5" USB 3.0 SSD/HDD RAID SATA enclosure is the ideal way to protect your important data from loss. The RAID1 function allows the data to be mirrored and stored identically on both hard drives. The RAID0 function is used to partition the data in blocks between the two hard drives. The enclosure also offers the JBOD function, which allows two hard drives to be combined into a total hard drive. In normal mode, both hard drives are displayed as separate hard drives. The individual modes can be configured using the DIP switch on the enclosure. The USB 3.0 port on the enclosure provides fast data transfer between the source and the enclosure. The RAID enclosure can also be connected to a NAS or a router using a USB port and a NAS function. Thus, it is also possible to use the RAID enclosure within your network.
Technical Details
Enables hard drive mirroring to ensure fail-safe operation
Meets the USB 3.0 standard
Downward compatibility with USB 2.0
Using normal mode (2 separate hard drives)
Using JBOD (hard drives are combined)
RAID0 operation (blockwise writing of hard disks)
RAID1 operation (hard drive mirroring)
Automatic recovery in case of defects
Mode setting via DIP switch
2x SATA III interfaces
Maximum 2 x 2 TB hard drive capacity
Package content
3.5" USB 3.0 SSD/HDD RAID SATA enclosure
Power adapter
USB connection cable
QIG (quick installation guide)