Zyxel LTE7490-M904,LTE B1/3/5/7/8/20/28/38/40/41,WCDMA B1/3/5/8, Standard,EU/UK Plug,FCS, support CA B1+B3/7

Zyxel LTE7490-M904,LTE B1/3/5/7/8/20/28/38/40/41,WCDMA B1/3/5/8, Standard,EU/UK Plug,FCS, support CA B1+B3/7 
 
Výrobce
Síťové prvky
Kód
 202940
Part No.
 LTE7490-M904-EU01V1F

Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router supports Cat. 18 and perfect for the operators who are looking for 4G LTE FWA solutions to deliver ultra-fast and high-capacity premium broadband services with deployment flexibility.

Lightning-fast internet connectivity
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router employs 3GPP UE downlink Category 18 – the top-level LTE technology with downlink data rates of up to 1.2 Gbps through 12 spatial streams on three component carriers.

Built-in 4x4 MIMO high-gain antenna
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router provides 4x4 MIMO high-gain antennas of up to 7 dBi per element that work effectively in outdoor environments. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage and bandwidth as well as to eliminate edge corners having difficulty accessing good signals.

Strengthen your competitive edge with Fixed Wireless Access (FWA)
Deploying LTE7490-M904 as part of FWA allows you to extend your 4G service coverage into subscribers’ homes and workplaces without extra wire infrastructure. This secures the TCOs and increases business revenue by supporting a larger number of subscribers with a premium fixed-grade connection.

Non-stop connectivity with LTE 2nd WAN for failover
The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports "Dual-WAN Failover", you can just connect Zyxel LTE7490-M904 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.

IP networking

Supports IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
Supports ICMP
Virtual Private Network (VPN) passthrough
Supports NAT/NAPT
Supports NAT DMZ
Supports port forwarding/triggering
Supports ALG
Routing

Supports router mode
Supports bridge (IP pass-through) mode
Supports dynamic DNS for first APN
Supports remote management under bridge mode
IP firewall

Firewall can be enabled or disabled via GUI
DoS attack prevention
Supports SPI
Application-level firewall
Filters LAN MAC addresses
Filters URLs
Management

Supports local/remote device management and firmware upgrade via TR-069, HTTP/web GUI and FTP
APN management
Account management
PIN/PUK management
Network selection
Operating frequency band selection
CLI/SSH (local and remote SSH access)
Supports UPnP IGD
Supports SSH with key access certification management
Supports bandwidth/quota management
Supports mobile apps (iOS and Android) for easy installation and local management only
Supports remote throughput testing by TR-143
WiFi Protected Setup (WPS)
Hidden SSID

LTE interface

Standard-compliant: 3GPP UE DL Category 18, UL Category 13
Supports LTE bands: B1/B3/B5/B7/B8/B20/B28/38/40/41
Supports DL transmission mode TM1/2/3/4/6/7/8/9
LTE antennas: 4 embedded directional antennas of up to 7 dBi/element (4x4 MIMO)
Supports DL 5xCA**, 2x2 MIMO
Supports DL 3xCA, 4x4 MIMO, B1/3/7**
Supports DL modulations QPSK, 16-QAM, 64-QAM and 256-QAM
Supports UL modulations QPSK, 16-QAM and 64-QAM
Supports UL 2xCA** intra-band, B3/7/38/40/41
Peak data rates:
DL: 1.2 Gbps within 100 MHz bandwidth
UL: 150 Mbps within 40 MHz bandwidth
UMTS Air interface

Standard-compliant: WCDMA bands 1/3/5/8
Supported frequencies:
HSPA+/UMTS: 2100/1800/900/850 MHz (bands 1/3/5/8)
WCDMA: 2100/1800/900/850 MHz
HSPA+ downlink data rates up to 42 Mbps
HSUPA uplink data rates up to 5.76 Mbps
WiFi Air interface***

Wireless standards: 802.11 b/g/n, 2.4 GHz, 300 Mbps
Wireless omni antennas:
WiFi 2.4 GHz: 2x2 internal antennas up to 3 dBi
Hardware Interface

One Gigabit RJ-45 PoE LAN port
One LED indicator for:
Power status
Internet status
LTE signal strength
WiFi status
LAN status
One WiFi on/off button
One 3FF micro SIM card socket
One reset to default button
Power specifications

Standard 802.3af/at Power over Ethernet (PoE)
Power consumption at PoE < 16 W

Power consumption
16 watt (peak)

Physical specifications
Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
Item weight: 1100 g (2.43 lb.)
Package dimensions (WxDxH): 280 x 402 x 108 mm (11.02” x 15.83” x 4.25”)
Package weight: 2520 g (5.55 lb.)

Environmental specifications
Ingress Protection rating

IP68 harden for outdoor environments
Lightning protection

K.21 enhanced mode, 6 kV
Operating environment

Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity: 5% to 95% (non-condensing)
Storage environment

Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% (non-condensing)

Certification
CE
WEEE (Waste Electrical and Electronic Equipment) Directive certification
RoHS (Restriction of Hazardous Substances) Directive certification
HSF (Hazardous Substance Free)
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste

Package contents
Standard 802.3af/at Power of Ethernet (PoE) injector
1.8 m Ethernet cable yellow 8P8C
Power cord
PG19 thread (cable gland)
Quick Start Guide
Warranty card
DoC and safety warning
Wall/pole mounting kit
Wire grounding kit

Dostupnost
Dostupnost na pobočkách
Hodnocení produktu
Hodnoceno 0x

    5 Roky Záruka

     
    Kontakt

    Nevíte si rady? Zavolejte mi.

    Produktová podpora

    572 433 860 (Po-Pá od 8 do 16)

    Popis produktu

    Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router supports Cat. 18 and perfect for the operators who are looking for 4G LTE FWA solutions to deliver ultra-fast and high-capacity premium broadband services with deployment flexibility.

    Lightning-fast internet connectivity
    The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router employs 3GPP UE downlink Category 18 – the top-level LTE technology with downlink data rates of up to 1.2 Gbps through 12 spatial streams on three component carriers.

    Built-in 4x4 MIMO high-gain antenna
    The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router provides 4x4 MIMO high-gain antennas of up to 7 dBi per element that work effectively in outdoor environments. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage and bandwidth as well as to eliminate edge corners having difficulty accessing good signals.

    Strengthen your competitive edge with Fixed Wireless Access (FWA)
    Deploying LTE7490-M904 as part of FWA allows you to extend your 4G service coverage into subscribers’ homes and workplaces without extra wire infrastructure. This secures the TCOs and increases business revenue by supporting a larger number of subscribers with a premium fixed-grade connection.

    Non-stop connectivity with LTE 2nd WAN for failover
    The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports "Dual-WAN Failover", you can just connect Zyxel LTE7490-M904 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.

    IP networking

    Supports IPv4/IPv6 dual stack (NDP IPv6)
    DHCP server
    Supports ICMP
    Virtual Private Network (VPN) passthrough
    Supports NAT/NAPT
    Supports NAT DMZ
    Supports port forwarding/triggering
    Supports ALG
    Routing

    Supports router mode
    Supports bridge (IP pass-through) mode
    Supports dynamic DNS for first APN
    Supports remote management under bridge mode
    IP firewall

    Firewall can be enabled or disabled via GUI
    DoS attack prevention
    Supports SPI
    Application-level firewall
    Filters LAN MAC addresses
    Filters URLs
    Management

    Supports local/remote device management and firmware upgrade via TR-069, HTTP/web GUI and FTP
    APN management
    Account management
    PIN/PUK management
    Network selection
    Operating frequency band selection
    CLI/SSH (local and remote SSH access)
    Supports UPnP IGD
    Supports SSH with key access certification management
    Supports bandwidth/quota management
    Supports mobile apps (iOS and Android) for easy installation and local management only
    Supports remote throughput testing by TR-143
    WiFi Protected Setup (WPS)
    Hidden SSID

    LTE interface

    Standard-compliant: 3GPP UE DL Category 18, UL Category 13
    Supports LTE bands: B1/B3/B5/B7/B8/B20/B28/38/40/41
    Supports DL transmission mode TM1/2/3/4/6/7/8/9
    LTE antennas: 4 embedded directional antennas of up to 7 dBi/element (4x4 MIMO)
    Supports DL 5xCA**, 2x2 MIMO
    Supports DL 3xCA, 4x4 MIMO, B1/3/7**
    Supports DL modulations QPSK, 16-QAM, 64-QAM and 256-QAM
    Supports UL modulations QPSK, 16-QAM and 64-QAM
    Supports UL 2xCA** intra-band, B3/7/38/40/41
    Peak data rates:
    DL: 1.2 Gbps within 100 MHz bandwidth
    UL: 150 Mbps within 40 MHz bandwidth
    UMTS Air interface

    Standard-compliant: WCDMA bands 1/3/5/8
    Supported frequencies:
    HSPA+/UMTS: 2100/1800/900/850 MHz (bands 1/3/5/8)
    WCDMA: 2100/1800/900/850 MHz
    HSPA+ downlink data rates up to 42 Mbps
    HSUPA uplink data rates up to 5.76 Mbps
    WiFi Air interface***

    Wireless standards: 802.11 b/g/n, 2.4 GHz, 300 Mbps
    Wireless omni antennas:
    WiFi 2.4 GHz: 2x2 internal antennas up to 3 dBi
    Hardware Interface

    One Gigabit RJ-45 PoE LAN port
    One LED indicator for:
    Power status
    Internet status
    LTE signal strength
    WiFi status
    LAN status
    One WiFi on/off button
    One 3FF micro SIM card socket
    One reset to default button
    Power specifications

    Standard 802.3af/at Power over Ethernet (PoE)
    Power consumption at PoE < 16 W

    Power consumption
    16 watt (peak)

    Physical specifications
    Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
    Item weight: 1100 g (2.43 lb.)
    Package dimensions (WxDxH): 280 x 402 x 108 mm (11.02” x 15.83” x 4.25”)
    Package weight: 2520 g (5.55 lb.)

    Environmental specifications
    Ingress Protection rating

    IP68 harden for outdoor environments
    Lightning protection

    K.21 enhanced mode, 6 kV
    Operating environment

    Temperature: -40°C to 60°C (-40°F to 140°F)
    Humidity: 5% to 95% (non-condensing)
    Storage environment

    Temperature: -40°C to 70°C (-40°F to 158°F)
    Humidity: 5% to 95% (non-condensing)

    Certification
    CE
    WEEE (Waste Electrical and Electronic Equipment) Directive certification
    RoHS (Restriction of Hazardous Substances) Directive certification
    HSF (Hazardous Substance Free)
    European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste

    Package contents
    Standard 802.3af/at Power of Ethernet (PoE) injector
    1.8 m Ethernet cable yellow 8P8C
    Power cord
    PG19 thread (cable gland)
    Quick Start Guide
    Warranty card
    DoC and safety warning
    Wall/pole mounting kit
    Wire grounding kit


    Více informací
     

    Poslat info

    Dotaz k tomuto produktu

    Váš e-mail
    Dotaz

    Nalezli jste jinde na internetu nižší cenu?

    Váš e-mail
    Cena bez DPH
    Cena s DPH
    WWW
    Komentář
    Mám o tento produkt zájem

    Zaslat informaci o produktu známému

    Váš e-mail
    Zaslat na e-mail
    Komentář

    Nahlásit chybu

    Popis závady
    Váš e-mail

    Diskuse (0)

    Facebook Diskuse