TRANSCEND SSD452K2 64GB Industrial (3K P/E) SSD disk 2.5" SATA3, 3D TLC, Aluminium case, 560MB/s R, 520 MB/W, černý

TRANSCEND SSD452K2 64GB Industrial (3K P/E) SSD disk 2.5" SATA3, 3D TLC, Aluminium case, 560MB/s R, 520 MB/W, černý 
 
Výrobce
PC komponenty
Kód
 209843
Part No.
 TS64GSSD452K2

TRANSCEND SSD452K2 64GB Industrial (3K P/E) SSD disk 2.5" SATA3, 3D TLC, Aluminium case, 560MB/s R, 520 MB/W, černý

Transcend's SSD452K2 features the SATA III 6Gb/s interface and state-of-the-art 3D NAND technology, which allows 96 layers of 3D NAND flash chips to be vertically stacked. Compared to 3D NAND at 64 layers, this density breakthrough greatly improves storage efficiency, and its built-in DRAM cache allows faster access. Applied with Corner Bond technology, the SSD452K2 is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles and an extended operating temperature ranging from -20°C~75°C.

Technologies:
- Bad Block Management
- TRIM
- Read Disturbance
- Wear Leveling
- Garbage Collection
- Thermal Sensor
- 96-layer 3D NAND Flash
- AES Encryption
- Extended Temperature
- Corner Bond

Features:
DRAM Cache embedded
Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
Key components fortified by default with Corner Bond technology
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
Built-in LDPC ECC (Error Correction Code) functionality
Enhanced S.M.A.R.T. function
Dynamic thermal throttling
Compliant with RoHS 2.0 standards
Supports Trim and NCQ command
Power-saving DevSleep (Device Sleep) mode

Specifications:
Dimensions: 100 mm x 69.85 mm x 6.8 mm
Weight: 54 g
Form Factor: 2.5"
Bus Interface: SATA III 6Gb/s
Flash Type: 3D NAND flash
Capacity: 64 GB
Operating Voltage: 5V±5%
Operating Temperature: Extended -20°C ~ 75°C
Storage Temperature: -55°C ~ 85°C
Humidity: 5% ~ 95%
Shock: 1500 G, 0.5 ms, 3 axis
Vibration (Operating): 20 G (peak-to-peak), 7 Hz ~ 2000 Hz (frequency)
Power Consumption (Operation): 3.5 watt(s)
Power Consumption (Sleep): 0.5 watt(s)
Sequential Read/Write (CrystalDiskMark, max.):
- Read: up to 560 MB/s
- Write: up to 520 MB/s
4K Random Read/Write (IOmeter, max.):
- Read: up to 90,000 IOPS
- Write: up to 85,000 IOPS
Mean Time Between Failures (MTBF): 3,000,000 hour(s)
Terabytes Written (Max.): 3,520 TBW
Drive Writes Per Day (DWPD): 1.61 (3 yrs)

Note
Speed may vary due to host hardware, software, usage, and storage capacity.
The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.

Certificate : CE/FCC/BSMI
Warranty: Three-year Limited Warranty

Warranty does not apply when SSD Scope's wear-out indicator displays 0% within the warranty coverage.
Due to the complexity and variety of industrial applications, Transcend cannot guarantee 100% compatibility with all platforms and under all scenarios. For special applications and environments, it is strongly suggested that you contact Transcend beforehand for clarification.
SSD Scope Pro software is required by request. Please contact us for more information.

Dostupnost
Dostupnost na pobočkách
Hodnocení produktu
Hodnoceno 0x

    36 Měsíce Záruka

     
    Kontakt

    Nevíte si rady? Zavolejte mi.

    Produktová podpora

    572 433 860 (Po-Pá od 8 do 16)

    Popis produktu

    TRANSCEND SSD452K2 64GB Industrial (3K P/E) SSD disk 2.5" SATA3, 3D TLC, Aluminium case, 560MB/s R, 520 MB/W, černý

    Transcend's SSD452K2 features the SATA III 6Gb/s interface and state-of-the-art 3D NAND technology, which allows 96 layers of 3D NAND flash chips to be vertically stacked. Compared to 3D NAND at 64 layers, this density breakthrough greatly improves storage efficiency, and its built-in DRAM cache allows faster access. Applied with Corner Bond technology, the SSD452K2 is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles and an extended operating temperature ranging from -20°C~75°C.

    Technologies:
    - Bad Block Management
    - TRIM
    - Read Disturbance
    - Wear Leveling
    - Garbage Collection
    - Thermal Sensor
    - 96-layer 3D NAND Flash
    - AES Encryption
    - Extended Temperature
    - Corner Bond

    Features:
    DRAM Cache embedded
    Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
    Key components fortified by default with Corner Bond technology
    Advanced Global Wear-Leveling and Block management for reliability
    Advanced Garbage Collection
    Built-in LDPC ECC (Error Correction Code) functionality
    Enhanced S.M.A.R.T. function
    Dynamic thermal throttling
    Compliant with RoHS 2.0 standards
    Supports Trim and NCQ command
    Power-saving DevSleep (Device Sleep) mode

    Specifications:
    Dimensions: 100 mm x 69.85 mm x 6.8 mm
    Weight: 54 g
    Form Factor: 2.5"
    Bus Interface: SATA III 6Gb/s
    Flash Type: 3D NAND flash
    Capacity: 64 GB
    Operating Voltage: 5V±5%
    Operating Temperature: Extended -20°C ~ 75°C
    Storage Temperature: -55°C ~ 85°C
    Humidity: 5% ~ 95%
    Shock: 1500 G, 0.5 ms, 3 axis
    Vibration (Operating): 20 G (peak-to-peak), 7 Hz ~ 2000 Hz (frequency)
    Power Consumption (Operation): 3.5 watt(s)
    Power Consumption (Sleep): 0.5 watt(s)
    Sequential Read/Write (CrystalDiskMark, max.):
    - Read: up to 560 MB/s
    - Write: up to 520 MB/s
    4K Random Read/Write (IOmeter, max.):
    - Read: up to 90,000 IOPS
    - Write: up to 85,000 IOPS
    Mean Time Between Failures (MTBF): 3,000,000 hour(s)
    Terabytes Written (Max.): 3,520 TBW
    Drive Writes Per Day (DWPD): 1.61 (3 yrs)

    Note
    Speed may vary due to host hardware, software, usage, and storage capacity.
    The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.

    Certificate : CE/FCC/BSMI
    Warranty: Three-year Limited Warranty

    Warranty does not apply when SSD Scope's wear-out indicator displays 0% within the warranty coverage.
    Due to the complexity and variety of industrial applications, Transcend cannot guarantee 100% compatibility with all platforms and under all scenarios. For special applications and environments, it is strongly suggested that you contact Transcend beforehand for clarification.
    SSD Scope Pro software is required by request. Please contact us for more information.


    Více informací
     

    Poslat info

    Dotaz k tomuto produktu

    Váš e-mail
    Dotaz

    Nalezli jste jinde na internetu nižší cenu?

    Váš e-mail
    Cena bez DPH
    Cena s DPH
    WWW
    Komentář
    Mám o tento produkt zájem

    Zaslat informaci o produktu známému

    Váš e-mail
    Zaslat na e-mail
    Komentář

    Nahlásit chybu

    Popis závady
    Váš e-mail

    Diskuse (0)

    Facebook Diskuse