TRANSCEND MTE110Q 1TB SSD disk M.2 2280, PCIe Gen3 x4 NVMe 1.3 (3D QLC), 2000MB/s R, 1500MB/s W

TRANSCEND MTE110Q 1TB SSD disk M.2 2280, PCIe Gen3 x4 NVMe 1.3 (3D QLC), 2000MB/s R, 1500MB/s W 
 
Výrobce
PC komponenty
Kód
 219836
Part No.
 TS1TMTE110Q

TRANSCEND MTE110Q 1TB SSD disk M.2 2280, PCIe Gen3 x4 NVMe 1.3 (3D QLC), 2000MB/s R, 1500MB/s W

Transcend's PCIe® SSD 110Q utilizes top-notch technology QLC 3D NAND to enhance storage density that supports read/write intensive workloads. Implemented with PCI Express® Gen3 x4 high-speed interface, the read speed is up to 2,000 MB/s while write speed is up to 1,500 MB/s. To upgrade your computing devices, SSD 110Q is the most economical solution for all!

Best performance in the extreme
Transcend's PCIe SSD 110Q follows NVMe 1.3 and utilizes the PCIe Gen3 x4 interface, meaning four lanes are used for transmitting and receiving data simultaneously, resulting in compelling performance of up to 2,000MB/s read and 1,500MB/s write.
Note: Performance is based on CrystalDiskMark v5.0.2.

Less is more
Leveraging QLC 3D NAND technology, PCIe SSD 110Q stacks 4-bit-per-cell vertically to enhance the storage density. QLC NAND supports read/write intensive applications, and leads SSD 110Q to become one of the flash memories with the highest density in the market. More than that, 1 TB storage options is available. Users can store as much data as they want!

Understanding the NVMe PCIe interface
NVMe® (or NVM Express®) is a host controller interface standard designed to address the needs of enterprise and client applications that utilize PCIe®(PCI Express®) solid-state storage. NVMe calls for better performance vectors than AHCI (Advanced Host Controller Interface), including scalable bandwidth, increased IOPS, and low latency.

Low power, high efficiency
PCIe SSD 110Q not only optimizes the transfer speeds and storage density, its low-power consumption also makes the device even more lasting and efficient. The most economical solution is up to you to choose.

Transcend SSD Scope software
To keep your Transcend SSD running fast and error-free, Transcend's SSD Scope software application is available for download free of charge. Monitor your SSD's health status with S.M.A.R.T. technology, enable the TRIM command for optimum write speeds, keep your SSD's firmware up-to-date, and migrate data from your original drive to a new SSD with just a few clicks.

Guaranteed quality
To ensure the utmost level of quality, Transcend SSDs undergo rigorous testing at all stages of production, including tests for vibration, temperature and humidity, speed, and functionality.

Specifications
Dimensions: Double-sided 80 mm x 22 mm x 3.58 mm
Weight: 8 g
Type: M.2 2280
Bus Interface: NVMe PCIe Gen3 x4
Flash Type: QLC NAND flash
Capacity: 1 TB
Operating Temperature: 0°C ~ 70°C
Operating Voltage: 3.3V±5%
Performance:
Sequential Read/Write (CrystalDiskMark): up to 2,000/1,500 MB/s
4K Random Read/Write (IOmeter): up to 170,000/250,000 IOPS
Terabytes Written (TBW): 300 TBW
Mean Time Between Failures (MTBF): 2,000,000 hour(s)
Drive Writes Per Day (DWPD): 0.27 (3 yrs)

Note
Speed may vary due to host hardware, software, usage, and storage capacity.
The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.
Terabytes Written (TBW) expresses the endurance under the highest capacity.
Some motherboards only provide PCIe x2 connections for the M.2 slot, creating a bottleneck on even the fastest drives.

Certificate : CE/FCC/BSMI/KC/RCM/UKCA
Warranty: Three-year Limited Warranty

Warranty does not apply when SSD Scope's lifetime indicator displays 0% within the warranty coverage.
Operating System:
Microsoft Windows 11
Microsoft Windows 7 (additional driver required)
Microsoft Windows 8 (additional driver required)
Microsoft Windows 10
Linux Kernel 2.6.31 or later

Note
Systems for use with the PCIe M.2 SSD must have an M.2 connector with only an M key. B-key connectors are not compatible. Improper insertion may lead to damage. Please click here for more information.

Technology
S.M.A.R.T.
Advanced Garbage Collection
LDPC Coding

Dostupnost
Dostupnost na pobočkách
Hodnocení produktu
Hodnoceno 0x

    36 Měsíce Záruka

     
    Kontakt

    Nevíte si rady? Zavolejte mi.

    Produktová podpora

    572 433 860 (Po-Pá od 8 do 16)

    Popis produktu

    TRANSCEND MTE110Q 1TB SSD disk M.2 2280, PCIe Gen3 x4 NVMe 1.3 (3D QLC), 2000MB/s R, 1500MB/s W

    Transcend's PCIe® SSD 110Q utilizes top-notch technology QLC 3D NAND to enhance storage density that supports read/write intensive workloads. Implemented with PCI Express® Gen3 x4 high-speed interface, the read speed is up to 2,000 MB/s while write speed is up to 1,500 MB/s. To upgrade your computing devices, SSD 110Q is the most economical solution for all!

    Best performance in the extreme
    Transcend's PCIe SSD 110Q follows NVMe 1.3 and utilizes the PCIe Gen3 x4 interface, meaning four lanes are used for transmitting and receiving data simultaneously, resulting in compelling performance of up to 2,000MB/s read and 1,500MB/s write.
    Note: Performance is based on CrystalDiskMark v5.0.2.

    Less is more
    Leveraging QLC 3D NAND technology, PCIe SSD 110Q stacks 4-bit-per-cell vertically to enhance the storage density. QLC NAND supports read/write intensive applications, and leads SSD 110Q to become one of the flash memories with the highest density in the market. More than that, 1 TB storage options is available. Users can store as much data as they want!

    Understanding the NVMe PCIe interface
    NVMe® (or NVM Express®) is a host controller interface standard designed to address the needs of enterprise and client applications that utilize PCIe®(PCI Express®) solid-state storage. NVMe calls for better performance vectors than AHCI (Advanced Host Controller Interface), including scalable bandwidth, increased IOPS, and low latency.

    Low power, high efficiency
    PCIe SSD 110Q not only optimizes the transfer speeds and storage density, its low-power consumption also makes the device even more lasting and efficient. The most economical solution is up to you to choose.

    Transcend SSD Scope software
    To keep your Transcend SSD running fast and error-free, Transcend's SSD Scope software application is available for download free of charge. Monitor your SSD's health status with S.M.A.R.T. technology, enable the TRIM command for optimum write speeds, keep your SSD's firmware up-to-date, and migrate data from your original drive to a new SSD with just a few clicks.

    Guaranteed quality
    To ensure the utmost level of quality, Transcend SSDs undergo rigorous testing at all stages of production, including tests for vibration, temperature and humidity, speed, and functionality.

    Specifications
    Dimensions: Double-sided 80 mm x 22 mm x 3.58 mm
    Weight: 8 g
    Type: M.2 2280
    Bus Interface: NVMe PCIe Gen3 x4
    Flash Type: QLC NAND flash
    Capacity: 1 TB
    Operating Temperature: 0°C ~ 70°C
    Operating Voltage: 3.3V±5%
    Performance:
    Sequential Read/Write (CrystalDiskMark): up to 2,000/1,500 MB/s
    4K Random Read/Write (IOmeter): up to 170,000/250,000 IOPS
    Terabytes Written (TBW): 300 TBW
    Mean Time Between Failures (MTBF): 2,000,000 hour(s)
    Drive Writes Per Day (DWPD): 0.27 (3 yrs)

    Note
    Speed may vary due to host hardware, software, usage, and storage capacity.
    The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.
    Terabytes Written (TBW) expresses the endurance under the highest capacity.
    Some motherboards only provide PCIe x2 connections for the M.2 slot, creating a bottleneck on even the fastest drives.

    Certificate : CE/FCC/BSMI/KC/RCM/UKCA
    Warranty: Three-year Limited Warranty

    Warranty does not apply when SSD Scope's lifetime indicator displays 0% within the warranty coverage.
    Operating System:
    Microsoft Windows 11
    Microsoft Windows 7 (additional driver required)
    Microsoft Windows 8 (additional driver required)
    Microsoft Windows 10
    Linux Kernel 2.6.31 or later

    Note
    Systems for use with the PCIe M.2 SSD must have an M.2 connector with only an M key. B-key connectors are not compatible. Improper insertion may lead to damage. Please click here for more information.

    Technology
    S.M.A.R.T.
    Advanced Garbage Collection
    LDPC Coding


    Více informací
     

    Poslat info

    Dotaz k tomuto produktu

    Váš e-mail
    Dotaz

    Nalezli jste jinde na internetu nižší cenu?

    Váš e-mail
    Cena bez DPH
    Cena s DPH
    WWW
    Komentář
    Mám o tento produkt zájem

    Zaslat informaci o produktu známému

    Váš e-mail
    Zaslat na e-mail
    Komentář

    Nahlásit chybu

    Popis závady
    Váš e-mail

    Diskuse (0)

    Facebook Diskuse