Netgear M4200-10MG-POE+ MANAGED SWITCH

Product Number: M4200-10MG-PoE-Plus

Model Description: Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch For Wave 2 11ac AP Deployment

Ordering Number: GSM4210P
Acoustics: Whisper quiet 28.9dB @ 25°C (77°F)
Power Consumption (Max): 281.6 Watts @ full PoE+
RJ45 Ports: 8 x 1G / 2.5G including two of these ports with 5Gbps capability
10G Fiber SFP+ Ports: 2 x SFP+ (1G and 10G speeds)
Power over Ethernet: 8 x PoE+ 30W ports
PoE Budget (Watts): 240W
Feature Set: Layer 3 (static routing and RIP dynamic routing)

Management Ports
- 1G Ethernet service port for out-of-band management (OOB, RJ45)
- RS232 straight-through serial RJ45 for local management console
- Mini-USB port for local management console
- USB port for local storage, logs, configuration or image files

Form Factor: Easy Mount for standard rack mounting and plenum mounting on poles or walls

Key features:
1G, 2.5G and 5G NBASE-T compliant access layer in campus LAN and midsize organizations networks
Line-rate 8 x 2.5G access layer and 2 x 10G aggregation for 802.11ac wireless access points with PoE+ full provisioning
Advanced Layer 2, Layer 3 and Layer 4 feature set including static routing and RIP dynamic routing
Multi-Gigabit NBASE-T enables 2.5X to 5X faster speeds up to 100m on legacy Cat5e/Cat6 cables - yet providing 100M and 1G backward compatibility
Whisper quiet 28.9dB acoustics when operating at 25°C (77°F), well below normal offices ambient background noise
Secure placement above drop-down ceilings, in air passageways and where other switches will not go, vertical or horizontal, flat or perpendicular
Easy Mount options whether it's directly on a wall, attached to a rectangular or round pole, or mounted in a standard 19-inch rack
PoE+ (30 watts per port) across all (8) Multi-Gigabit access ports with 240W budget
Low latency and scalable table size with 16K MAC, 1K ARP/NDP, 1K VLANs, 64 routes
SDN-Ready OpenFlow 1.3 support for maximum investment protection

Software:
Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
Comprehensive IPv4/IPv6 static and IPv4 dynamic routing including RIP
Layer 2 multicast forwarding with IGMPv3/MLDv2 Snooping and IGMPv2/MLDv1 Snooping Querier
Advanced security including malicious code detection, DHCP Snooping, Dynamic ARP Inspection and DoS attacks mitigation
Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization

Availability:
Link Dependency new feature enables or disables ports based on the link state of different ports
Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP) offer interoperability with PVST+ infrastructures

Management:
DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
Service port for out-of-band Ethernet management (OOB)
Standard RS232 straight-through serial RJ45 and Mini-USB ports for local management console
Standard USB port for local storage, logs, configuration or image files
Dual firmware image and configuration file for updates with minimum service interruption
Industry standard command line interface (CLI) for IT admins used to other vendors commands
Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface
Single-pane-of-glass NMS300 management platform with mass-configuration support