IOI FWB-PCIE1x20 PCI Express x1 FW-B 3Port (2+1)

IOI FWB-PCIE1x20 PCI Express x1 FW-B 3Port (2+1) 
 
Výrobce
PC komponenty
Kód
 49470
Part No.
 61557

Specifikace
- PCI Express Host Adapter na 3 porty OHCI 1.1 kompatibilní IEEE-1394B
- PCI Express x1
- 2+1 FireWire-B porty (2 x externí, 1 x interní)
- čipová sada: Agere/LSI FW643
- rychlost přenosu dat: 800Mbps
- Bus power konektor: IDE 4-pin DC napájecí konektor
- pro Windows 2000/XP, Server2003, MacOS 10.4.8 nebo vyšší, Linux 2.6
- Standard- a LowProfile záslepka slotu součástí dodávky

OHCI (Open Host Controller Interface)
Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
8 Kbyte isochronous transmit FIFO.
4 Kbyte asynchronous transmit FIFO.
8 Kbyte isochronous receive FIFO.
8 Kbyte asynchronous receive FIFO.
Dedicated asynchronous and isochronous descriptor-based DMA engines.
Eight isochronous transmit contexts.
Eight isochronous receive contexts.
Supports parallel processing of incoming physical read and write requests.
Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.  


1394b-2002 Link
Cycle master and isochronous resource manager capable.
Supports 1394a-2000 and 1394b-2002 acceleration features.  

1394b-2002 PHY
Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
Link is not required for hub operation.
Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
Does not require external filter capacitor for PLL.
Supports arbitrated short bus reset to improve utiliza-tion of the bus.
Supports ack-accelerated arbitration and fly-by concat-enation.
Supports PHY pinging and remote PHY access pack-ets.
Fully supports suspend/resume.
Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.

Dostupnost
Dostupnost na pobočkách
Hodnocení produktu
Hodnoceno 0x

    6 Měsíce Záruka

     
    Kontakt

    Nevíte si rady? Zavolejte nám.

    Kontakt

    000 000 000 (Po-Pá od 8 do 16)

    Popis produktu

    Specifikace
    - PCI Express Host Adapter na 3 porty OHCI 1.1 kompatibilní IEEE-1394B
    - PCI Express x1
    - 2+1 FireWire-B porty (2 x externí, 1 x interní)
    - čipová sada: Agere/LSI FW643
    - rychlost přenosu dat: 800Mbps
    - Bus power konektor: IDE 4-pin DC napájecí konektor
    - pro Windows 2000/XP, Server2003, MacOS 10.4.8 nebo vyšší, Linux 2.6
    - Standard- a LowProfile záslepka slotu součástí dodávky

    OHCI (Open Host Controller Interface)
    Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
    OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
    8 Kbyte isochronous transmit FIFO.
    4 Kbyte asynchronous transmit FIFO.
    8 Kbyte isochronous receive FIFO.
    8 Kbyte asynchronous receive FIFO.
    Dedicated asynchronous and isochronous descriptor-based DMA engines.
    Eight isochronous transmit contexts.
    Eight isochronous receive contexts.
    Supports parallel processing of incoming physical read and write requests.
    Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.  


    1394b-2002 Link
    Cycle master and isochronous resource manager capable.
    Supports 1394a-2000 and 1394b-2002 acceleration features.  

    1394b-2002 PHY
    Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
    Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
    Link is not required for hub operation.
    Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
    Does not require external filter capacitor for PLL.
    Supports arbitrated short bus reset to improve utiliza-tion of the bus.
    Supports ack-accelerated arbitration and fly-by concat-enation.
    Supports PHY pinging and remote PHY access pack-ets.
    Fully supports suspend/resume.
    Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

    Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.


    Více informací

    Poslat info

    Dotaz k tomuto produktu

    Váš e-mail
    Dotaz

    Nalezli jste jinde na internetu nižší cenu?

    Váš e-mail
    Cena bez DPH
    Cena s DPH
    WWW
    Komentář
    Mám o tento produkt zájem

    Zaslat informaci o produktu známému

    Váš e-mail
    Zaslat na e-mail
    Komentář

    Nahlásit chybu

    Popis závady
    Váš e-mail

    Diskuse (0)

    Facebook Diskuse