GIGABYTE SSD 1TB M30, NVMe, (R:3500 MB/s, W:3000 MB/s)

Form Factor: M.2 2280
Interface: PCI-Express 3.0 x4, NVMe 1.3
Total Capacity: 1TB
Sequential Read Speed : up to 3500 MB/s**
Sequential Write speed : up to 3000 MB/s**
Support advanced LDPC error correction
TRIM & S.M.A.R.T supported
External 2Gb DDR3L Cache
Efficiency thermal solution by using 2oz copper PCB

Rozhraní
PCIe 3.0x4, NVMe 1.3
Formát
M.2 2280
Celková kapacita
1TB
NAND
3D TLC NAND Flash
Externí DDR cache
DDR3L 2Gb
Rychlost sekvenčního čtení
Up to 3500 MB/s
Rychlost sekvenčního zápisu
Up to 3000 MB/s
IOPS náhodného čtení
up to 308K
Náhodný zápis [IOPS]
up to 332K
Rozměry
22 x 2.3 x 80 mm
Průměrný čas mezi selháním (MTBF)
2 million hours
Spotřeba (aktivní)
Average: R: 5.9W, W:5W
Spotřeba (nečinnost)
L0/L0s/L1: 900mw
L1.2 < 3mw
Teplota (provoz)
0°C to 70°C
Teplota (skladování)
-40°C to 85°C
Záruka
1. Limited 5-years or 650TBW.
2. Limited warranty based on 5 years or 650TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0)
Poznámka
• Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
• Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
• Speeds based on internal testing. Actual performance may vary.
• 1GB = 1 billion bytes. Actual useable capacity may vary.