ATEN PN-0108 8-Port Power Over the NET 10Amp

8-Port Power Over the NET™
PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

Altusen's PN0108 is equipped with eight hotpluggable ports for easy server rooom management. Each port can be individually controlled so that users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order. On/Off scheduling allows for preset start/shutdowns/restarts on a daily, weekly,monthly basis.
The PN0108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely

Features  
Remote power on / off / reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power Over the NET™) port  
Local power on / off / reboot control via the PN0108’s PON port to the computer’s RS-232 port  
Daisy chain up to 15 additional stations to control up to 128 outlets  
Manual switching between Local and Remote access for each port via front panel push button switches  
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order  
Easy setup and operation via a GUI interface  
Provides three configuration/management methods: Browser; Telnet; or Console Terminal  
Safe shutdown and rebooting for Windows systems*  
Overcurrent protection and recovery for each AC port (110 V model only); total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface  
Separate circuits for the unit’s power and the power to the devices – the power control status menu is still accessible even when an overcurrent condition trips the devices’ circuit breaker  
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times  
Port grouping - perform the same action on a specified group of ports  
LEDs for easy status monitoring  
Two level (Administrator and User) security  
Configuration can be reset  
Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus  
UL/TUV approved  
OS Support:Windows 2000, Windows XP, Windows Vista, LINUX, Unix and FreeBSD

*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed
*The PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

 Package Content  
1x PN0108 Station  
1x AC Source Power Cord  
8x Power Outlet Power Cords  
8x Safe Shutdown Cables  
1x PON Cable (DB9 F to DB9 M)  
1x User Manual  
1x Quick start guide  
1x Mounting Kit :Rack mounting brackets and hardware  
4x foot pads  
1x Software CD  
1x Registration card