ATEN 4-Port 10G Optical Output Board (4K@300m (K1, MM) / 10km (K2, SM))

ATEN 4-Port 10G Optical Output Board (4K@300m (K1, MM) / 10km (K2, SM)) 
 
Výrobce
Příslušenství k IT
Kód
 204011
Part No.
 VM8584K1-AT

The VM8584 4-Port 10G Optical Output Board offers an easy way to route 4 HDMI sources to HDMI displays through optical extenders, and up to 16/32 input and 16/32 output connections on an ATEN Modular Matrix Switch through various AV interfaces. Designed with fiber optics technology for long-distance transmission, the VM8584 along with its SFP+ module extends uncompressed 4K signal up to 300 m (using VM8584K1) or 10 km (using VM8584K2) over duplex fiber optic cables. The optical fiber simplifies cabling by guaranteeing an interference-free long-haul transmission of audio, video, IR, and RS-232 control signals over one single set of duplex cables that easily connects to the SFP+ slot. Moreover, the VM8584 supports a high data rate of 10.2 Gbps and meets HDMI Specifications that include 3D, Deep Color, and 4K to ensure superior video quality.

Fiber Optics
Data Rate 10.3 Gbps
Wavelength VM8584K1: 850 nm
VM8584K2: 1310 nm
Fiber Type VM8584K1: Multimode(MM), OM3, LC Duplex Type
VM8584K2: Singlemode(SM), LC Duplex Type
Video Output
Interfaces 4 x bi-directional SFP+ (LC)
Video
Max. Data Rate 10.2 Gbps (3.4 Gbps per lane)
Max. Pixel Clock 340 MHz
Compliance HDMI (3D, Deep Color, 4K)
HDCP 2.2 compatible
Consumer Electronics Control (CEC)
Max. Resolution Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Max. Distance VM8584K1: up to 300m (MM, OM3, Black)
VM8584K2: up to 10km (SM, Blue)
Control
RS-232 Channel 4 x Captive Screw Connectors, 3 pole
IR Channel 4 x Mini Stereo Jack Female (Black)
LEDs
Status 1 (Green)
Link 4 (Orange)
Power Consumption 22.96W:108BTU
Environmental
Operating Temperature 0–40°C
Storage Temperature -20–60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.65 kg ( 1.43 lb )
Dimensions (L x W x H) 35.20 x 23.80 x 2.33 cm
(13.86 x 9.37 x 0.92 in.)
Carton Lot 2 pcs
Note 1. The operating distance may vary depending on the fiber type, network bandwidth, connector splicing, signal losses, modal or chromatic dispersion, environmental factors, and kinks.
2. ATEN recommends using single-mode optical fibers that conform to IEC60793-2-50 B1.1 or ITU-T G.652.B specifications; multimode optical fibers that conform to IEC11801 (OM3) specification.
3. The VM8584 is a class 1 laser product and complies with the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

Compatible with the VM3250/VM3200/VM1600A; mix and match with modular I/O boards of any type for optimum flexibility
Extends audio/video, IR, and RS-232 control signals over long distances via duplex fiber optic cables
Superior video quality over long-distance transmission – up to 4096 x 2160@60Hz (4:2:0), 300m with VM8584K1 over multimode cables or 10km with VM8584K2 over single-mode cables
Scaler – features a 4K video scaling function to convert input resolutions to the optimum display resolutions*
Seamless Switch ™ – features close-to-zero second switching that provides continuous video streams, real-time switching, and stable signal transmissions*
Video Wall – allows you to create custom video wall layouts via intuitive web GUI*
HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
Consumer Electronics Control (CEC) support
Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners*
Bi-directional IR channel – IR transmission is processed one direction at a time, ranging from 30 kHz to 60 kHz*
EDID Expert ™ – selects optimum EDID settings for smooth power-up, high-quality display, and use of the best resolutions across different screens
FrameSync – prevents image tearing by synchronizing the scaler output frame rate to the input signal frame rate*
Hot-swappable fiber optic module and I/O boards for easy integration and maintenance

*Note: The VM8584 is designed to work with the VE883R video Receiver. The features are only available when used with the VE883R.

The ATEN VM input/output boards are hot-swappable which gives system integrators great flexibility and efficiency for installation and maintenance. The ATEN VM input/output boards along with ATEN Modular Matrix Switches offer ideal solutions that perfectly meet your demands for scalable video-critical applications.

Package Contents
1x VM8584 4-Port 10G Optical Output Board
4x SFP+ Modules
4x 3-Pole Terminal Blocks
1x IR Receiver
1x IR Emitter
1x User Instructions

Dostupnost
Dostupnost na pobočkách
Hodnocení produktu
Hodnoceno 0x

    3 Roky Záruka

     
    Kontakt

    Nevíte si rady? Zavolejte mi.

    Produktová podpora

    572 433 860 (Po-Pá od 8 do 16)

    Popis produktu

    The VM8584 4-Port 10G Optical Output Board offers an easy way to route 4 HDMI sources to HDMI displays through optical extenders, and up to 16/32 input and 16/32 output connections on an ATEN Modular Matrix Switch through various AV interfaces. Designed with fiber optics technology for long-distance transmission, the VM8584 along with its SFP+ module extends uncompressed 4K signal up to 300 m (using VM8584K1) or 10 km (using VM8584K2) over duplex fiber optic cables. The optical fiber simplifies cabling by guaranteeing an interference-free long-haul transmission of audio, video, IR, and RS-232 control signals over one single set of duplex cables that easily connects to the SFP+ slot. Moreover, the VM8584 supports a high data rate of 10.2 Gbps and meets HDMI Specifications that include 3D, Deep Color, and 4K to ensure superior video quality.

    Fiber Optics
    Data Rate 10.3 Gbps
    Wavelength VM8584K1: 850 nm
    VM8584K2: 1310 nm
    Fiber Type VM8584K1: Multimode(MM), OM3, LC Duplex Type
    VM8584K2: Singlemode(SM), LC Duplex Type
    Video Output
    Interfaces 4 x bi-directional SFP+ (LC)
    Video
    Max. Data Rate 10.2 Gbps (3.4 Gbps per lane)
    Max. Pixel Clock 340 MHz
    Compliance HDMI (3D, Deep Color, 4K)
    HDCP 2.2 compatible
    Consumer Electronics Control (CEC)
    Max. Resolution Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
    4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
    Max. Distance VM8584K1: up to 300m (MM, OM3, Black)
    VM8584K2: up to 10km (SM, Blue)
    Control
    RS-232 Channel 4 x Captive Screw Connectors, 3 pole
    IR Channel 4 x Mini Stereo Jack Female (Black)
    LEDs
    Status 1 (Green)
    Link 4 (Orange)
    Power Consumption 22.96W:108BTU
    Environmental
    Operating Temperature 0–40°C
    Storage Temperature -20–60°C
    Humidity 0 - 80% RH, Non-Condensing
    Physical Properties
    Housing Metal
    Weight 0.65 kg ( 1.43 lb )
    Dimensions (L x W x H) 35.20 x 23.80 x 2.33 cm
    (13.86 x 9.37 x 0.92 in.)
    Carton Lot 2 pcs
    Note 1. The operating distance may vary depending on the fiber type, network bandwidth, connector splicing, signal losses, modal or chromatic dispersion, environmental factors, and kinks.
    2. ATEN recommends using single-mode optical fibers that conform to IEC60793-2-50 B1.1 or ITU-T G.652.B specifications; multimode optical fibers that conform to IEC11801 (OM3) specification.
    3. The VM8584 is a class 1 laser product and complies with the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
    Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

    Compatible with the VM3250/VM3200/VM1600A; mix and match with modular I/O boards of any type for optimum flexibility
    Extends audio/video, IR, and RS-232 control signals over long distances via duplex fiber optic cables
    Superior video quality over long-distance transmission – up to 4096 x 2160@60Hz (4:2:0), 300m with VM8584K1 over multimode cables or 10km with VM8584K2 over single-mode cables
    Scaler – features a 4K video scaling function to convert input resolutions to the optimum display resolutions*
    Seamless Switch ™ – features close-to-zero second switching that provides continuous video streams, real-time switching, and stable signal transmissions*
    Video Wall – allows you to create custom video wall layouts via intuitive web GUI*
    HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
    Consumer Electronics Control (CEC) support
    Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners*
    Bi-directional IR channel – IR transmission is processed one direction at a time, ranging from 30 kHz to 60 kHz*
    EDID Expert ™ – selects optimum EDID settings for smooth power-up, high-quality display, and use of the best resolutions across different screens
    FrameSync – prevents image tearing by synchronizing the scaler output frame rate to the input signal frame rate*
    Hot-swappable fiber optic module and I/O boards for easy integration and maintenance

    *Note: The VM8584 is designed to work with the VE883R video Receiver. The features are only available when used with the VE883R.

    The ATEN VM input/output boards are hot-swappable which gives system integrators great flexibility and efficiency for installation and maintenance. The ATEN VM input/output boards along with ATEN Modular Matrix Switches offer ideal solutions that perfectly meet your demands for scalable video-critical applications.

    Package Contents
    1x VM8584 4-Port 10G Optical Output Board
    4x SFP+ Modules
    4x 3-Pole Terminal Blocks
    1x IR Receiver
    1x IR Emitter
    1x User Instructions


    Více informací
     

    Poslat info

    Dotaz k tomuto produktu

    Váš e-mail
    Dotaz

    Nalezli jste jinde na internetu nižší cenu?

    Váš e-mail
    Cena bez DPH
    Cena s DPH
    WWW
    Komentář
    Mám o tento produkt zájem

    Zaslat informaci o produktu známému

    Váš e-mail
    Zaslat na e-mail
    Komentář

    Nahlásit chybu

    Popis závady
    Váš e-mail

    Diskuse (0)

    Facebook Diskuse